chamfer

UK:  ['tʃæmfə(r)]

US:  ['tʃæmfə(r)]

复数：chamfers  

n.

1.槽,凹线;〔美国〕圆槽

2.倒圆

3.斜面,切角面,棱角

4.〔建〕削角;〔机〕圆角,侧角,侧棱

5.沟

6.渠

7.走线架

8.【机械工程】圆角,倒角,倒棱,斜切

9.【建筑】削角

v.

1.在…上雕槽[刻沟]

2.〔美国〕(用圆凿)刳(木、石等),在…上挖圆槽

3.刻槽

4.去…的角,斜切

1 . Two chamfer disk milling cutters are arranged on a chamfer main shaft, and are separated by a separating bush to determine spacing.
倒角主轴上装有两把倒角盘铣刀，通过隔套隔开并确定间距。

2 . A milling hole main shaft, the chamfer main shaft and a main electric motor are all installed on a revolution body.
铣孔主轴、倒角主轴和主电机均安装在回转体上。

3 . The length of chamfer shall be between1 and2 complete threads as measured parallel to the axis of the threaded component.
当平行于螺纹构件轴线方向进行测量时，倒角长度应该在1-2全螺纹扣之间。

4 . Chamfer cap-there are all easy to wear, it is not easy out, and firmly strong and not easily lost or damaged.
柱帽体有倒角容易戴入，不易拔出、牢固性强、不易丢失和破损。

5 . To create a smooth transition select edges along connection of the wall and the floor and apply Chamfer.
如果你要创建平滑的过渡，你可以沿着墙和地面交界的边，然后进行倒角。